open mobile menu

Subscribe to the Timescale Newsletter

By submitting you acknowledge Timescale's  Privacy Policy.

Building a Kafka Data Pipeline for Time Series With Kafka Connect and Timescale

Building a Kafka Data Pipeline for Time Series With Kafka Connect and Timescale


What Is Kafka Connect

Apache Kafka Connect is an ecosystem of pre-written and maintained Kafka Producers (source connectors) and Kafka Consumers (sink connectors) for various other data products and platforms like databases and message brokers. This allows you to easily build data pipelines without having to write and test your own consumers and producers.

There are two distinct types of connectors:

  • Source connectors: As the name suggests, these connectors act as a source of data and publish messages onto Kafka topics. For example, you can use the PostgreSQL JDBC source connector to publish a message onto a topic every time a row gets added to a table. This would allow you to set off a chain of events when (for example) someone posts a new message or a new user is created.
  • Sink connectors: These connectors consume data from a Kafka topic and upload or insert that data onto a different data platform. For example, when a user makes a post (which gets published on a Kafka topic), you might want that event inserted into a time series database (like Timescale) for record-keeping and analytical purposes.

But the real benefit comes from the fact that you are not limited to a one-to-one relationship between producers and consumers. You can have multiple connectors act on the same message. Maybe your message is flowing between microservices, but you also want to store these messages in S3 and a database but also send it to another message broker. The sky's the limit when it comes to building data pipelines using Apache Kafka Connect.

When I first started learning about Kafka and Kafka Connect, my biggest grievance was that there were almost no beginner-friendly end-to-end tutorials on properly setting up Kafka Connect for connectors that were more complicated than a local file sink. Because I had very limited Java experience, the ecosystem was quite daunting to wrap my head around, which made understanding and installing plugins all the more difficult.

My goal for this tutorial is to clearly explain every step to set up a JDBC Sink connector that streams data from a Kafka topic into a Timescale database without any guesswork. If you aren’t fond of blog posts and would rather just dive into the code, you can find the full shell script with all the necessary steps and commands here.

Kafka Connect Tutorial

This short tutorial will show you how to set up Kafka and Kafka Connect to stream data from a Kafka topic into a Timescale database.

Java runtime

Because Kafka is written almost entirely in Java, you need to install the headless Java runtime.

I am using Ubuntu 20.04, so throughout this blog post, I will use the apt package manager to install packages.

If you are on a different operating system or Linux distribution, I recommend reading the official Java/Kafka documentation for installation instructions.

sudo apt update
sudo apt install openjdk-11-jre-headless

After installing a Java runtime, it’s time to install Kafka!

Installing Kafka

Download the compressed archive from the official Apache repository using wget.

When the download finishes, create a directory called /usr/local/kafka. This is where we will store everything related to Kafka.

Use the chown command to change the directory ownership to you. If you plan on running this in production, it is worth creating a separate kafka user to launch the binaries and scripts from for added security.

Lastly, untar the compressed archive into the /usr/local/kafka directory.

wget https://downloads.apache.org/kafka/3.5.1/kafka_2.13-3.5.1.tgz
sudo mkdir /usr/local/kafka
sudo chown -R $(whoami) /usr/local/kafka

tar \
    -xzf kafka_2.13-3.5.1.tgz \
    -C /usr/local/kafka \
    --strip-components=1

In KIP-500, the KRaft consensus algorithm was added, removing the need to run a separate Zookeeper process alongside Kafka. And because I am all about simplicity, I will be using KRaft! To do so, you need to generate a random UUID and format the storage.

Then, all that is left for us to do is start Kafka using the kafka-server-start.sh script. Use the -daemon flag to run this process in the background. If you are having issues later down the line, I recommend omitting the -daemon flag and using tmux to temporarily run Kafka in a separate terminal.

The second argument in the “start” command is the configuration file, which, in this case,  is the default configuration file used when running Kafka with KRaft. This configuration will suffice for this tutorial, but I implore you to take a look at the file to see what you can change within Kafka.

export uuid=$(/usr/local/kafka/bin/kafka-storage.sh random-uuid)

/usr/local/kafka/bin/kafka-storage.sh format \
        -t $uuid \
        -c /usr/local/kafka/config/kraft/server.properties
        
/usr/local/kafka/bin/kafka-server-start.sh \
        -daemon \
        /usr/local/kafka/config/kraft/server.properties

Creating topics

Once your Kafka server has started, use the kafka-topics.sh script to create two topics:

  • The mytopic topic will be used to publish JSON messages onto that will be consumed by our sink connector and inserted into the Timescale database.
  • The deadletter topic will be used as a dead letter queue (duh). A dead letter queue is used to store messages that your Kafka Connect workers couldn’t process. The main benefit of this is that you can see what messages are causing errors, which will allow you to detect, understand, and solve problems faster!
/usr/local/kafka/bin/kafka-topics.sh \
        --create \
        --topic mytopic \
        --bootstrap-server localhost:9092 \
        --partitions 10
        
/usr/local/kafka/bin/kafka-topics.sh \
        --create \
        --topic deadletter \
        --bootstrap-server localhost:9092 \
        --partitions 10

Timescale database

Before we start setting up our Kafka connect workers, we need to create a Timescale database to store our messages in.

Without going too in-depth, create a service inside the Timescale Console.

Check out our Docs if you’d like to know more about creating a Timescale database.

Create a Timescale service page in the Timescale Console

After creating your service, copy the psql connection command and connect to it.

Connect to your service page in the Timescale Console

Once connected to your database, execute the following SQL statements:

CREATE TABLE accounts (created_at TIMESTAMPTZ DEFAULT NOW(),
    name TEXT,
    city TEXT);
    
SELECT create_hypertable('accounts', 'created_at');

Installing Kafka Connect

Now that your database is ready to accept messages, let’s set up the Kafka Connect server, plugins, drivers, and connectors!

Start off by making the /usr/local/kafka/plugins paths.

Add a single configuration line to the config/connect-distributed.properties file. This line simply points the Kafka Connect process to the directory of plugins it can use.

mkdir /usr/local/kafka/plugins 
/usr/local/kafka/plugins/camel-postgresql-sink-kafka-connector

echo "plugin.path=/usr/local/kafka/plugins" >> /usr/local/kafka/config/connect-distributed.properties

Next up, download the camel PostgreSQL sink connector and extract it in the plugins directory you created earlier.

wget https://repo.maven.apache.org/maven2/org/apache/camel/kafkaconnector/camel-postgresql-sink-kafka-connector/3.18.2/camel-postgresql-sink-kafka-connector-3.18.2-package.tar.gz

tar \
    -xzf camel-postgresql-sink-kafka-connector-3.18.2-package.tar.gz \
    -C /usr/local/kafka/plugins/camel-postgresql-sink-kafka-connector \
    --strip-components=1

Then, download the PostgreSQL driver and move it to the plugins directory.

wget https://jdbc.postgresql.org/download/postgresql-42.6.0.jarmv postgresql-42.6.0.jar 
/usr/local/kafka/plugins/camel-postgresql-sink-kafka-connector

When that’s done, start the Kafka Connect process. Much like the Kafka process, if things aren’t going to plan, omit the -daemon flag and start the process in a tmux window to see the output.

/usr/local/kafka/bin/connect-distributed.sh 
     -daemon \ 
 /usr/local/kafka/config/connect-distributed.properties

Creating the Timescale sink

Now that Kafka, Kafka Connect, and your Timescale database are all running, you’re ready to create your first Timescale sink.

The way you add a Kafka connector is by sending a POST request to the Kafka Connect REST API on port 8083. The body of this POST request contains your connector configuration in JSON format.

Some interesting fields in this configuration are:

  • connector.class: describes the connector class, which can be found in the plugin directory we configured earlier.
  • errors.tolerance: a connector fails when encountering an erroneous message by default. In many cases, this is a very desirable behavior as you do not want the connector to propagate or process these messages.
  • errors.deadletterqueue: describes the topic on which the erroneous messages are published.
  • tasks.max: describes the maximum number of workers. If set to 10, Kafka Connect will, at most, run 10 concurrent PostgreSQL sinks. Keep in mind that there can only be one worker per topic partition. Setting tasks.max to 100, while you only have 20 partitions on that topic, will be no faster than setting tasks.max to 20.
  • topics: contains a list of topics the connector will consume from. In this case, the connector will only consume messages from the mytopic topic.

Don’t forget to modify the camel.kamelet.postgresql-sink fields with your database password, serverName (URL), and serverPort (port).

echo '{
  "name": "timescale-sink",
  "config": {
    "connector.class": "org.apache.camel.kafkaconnector.postgresqlsink.CamelPostgresqlsinkSinkConnector",
    "errors.tolerance": "all",
    "errors.deadletterqueue.topic.name": "deadletter",
    "tasks.max": 10,
    "value.converter": "org.apache.kafka.connect.storage.StringConverter",
    "key.converter": "org.apache.kafka.connect.storage.StringConverter",
    "topics": "mytopic",
    "camel.kamelet.postgresql-sink.databaseName": "tsdb",
    "camel.kamelet.postgresql-sink.username": "tsdbadmin",
    "camel.kamelet.postgresql-sink.password": "password",
    "camel.kamelet.postgresqlsink.serverName": "service_id.project_id.tsdb.cloud.timescale.com",
    "camel.kamelet.postgresql-sink.serverPort": "5432",
    "camel.kamelet.postgresql-sink.query": "INSERT INTO accounts (name,city) VALUES (:#name,:#city)"
  }
}' > timescale-sink.properties

To make working with this REST API a little easier, I prefer to write the JSON configuration to a file, use the cat command, and pipe it into the curl command. This is what that command looks like:

cat timescale-sink.properties | curl -X POST -d @- http://localhost:8083/connectors -H "Content-Type: application/json"

To validate whether or not our connector was added successfully, we can query the /connectors route in a GET request, and our sink should show up.

curl -X GET http://localhost:8083/connectors
#["timescale-sink"]

Kafkacat

To validate our installation, we want to send some messages onto the `mytopic` topic. We can do this very easily using the kafkacat or kcat utility.

sudo apt install kafkacat

The kafkacat flags we will be using are:

  • -P: tells Kafkacat we want to Produce messages
  • -b: defines bootstrap brokers' location
  • -t: defines topics on which to publish

Then, we pipe a JSON string containing a name and city into kafkacat.

echo '{"name":"Mathis","city":"Salt Lake City"}' | kafkacat -P -b localhost:9092 -t mytopic
echo '{"name":"Oliver","city":"Moab"}' | kafkacat -P -b localhost:9092 -t mytopic
echo '{"name":"Lauren","city":"Park City"}' | kafkacat -P -b localhost:9092 -t mytopic

If we then query our database for all rows in the accounts table, we can see that all three messages appear.

tsdb=> SELECT * FROM accounts;
created_at                    |  name  |      city
------------------------------+--------+----------------
2023-08-23 18:04:51.101906+00 | Mathis | Salt Lake City
2023-08-23 18:04:54.856341+00 | Oliver | Moab
2023-08-23 18:04:58.217255+00 | Lauren | Park City

You might also be wondering how the created_at column was populated. If you look back at our table creation statement, we added the created_at column of type TIMESTAMPTZ with the default value set to NOW(). This means that the timestamp is added at the beginning of the transaction.

While this might be an easy way to add timestamps to messages or events, it is highly recommended to do this at the origin before the message is sent as publishing on a Kafka topic, waiting for a Kafka Connector to consume the message and insert it in the database can take quite a while.

Depending on the settings of your Kafka Connector (batch.size and linger.ms), it may wait several seconds before consuming and inserting messages in an attempt to batch messages together.

The End

Congratulations! You’ve successfully built a data pipeline that streams data from a Kafka topic (or shell command that publishes data onto a topic) into a Timescale database.

You can read how other Timescale users are integrating Kafka into their data pipelines:

Or try it out for yourself: sign up for a free trial of Timescale for 30 days, no credit card required.

Ingest and query in milliseconds, even at petabyte scale.
This post was written by

Originally posted

Last updated

9 min read
Apache Kafka
Contributors

Related posts